Users of iPhone or other cell phones with Bluetooth technology can safely purchase wireless headphones, as it is not difficult to connect them to the device. The principle of connecting a smartphone with additional equipment wirelessly is almost the same.
Content:
Depending on which operating system is installed in the device, access to the settings may be different. Therefore, the user who decided to find out how to connect headphones to the phone, in addition to this article, should use the instructions of the manufacturer of the smartphone. It shows step by step how to access the settings and how to change the phone settings in order to connect the two devices wirelessly. Further, the way of connection will be described on the example of iPhone and Android cell phone.
The instructions will be useful for users of iPhone of different models, which allow to connect additional devices via Bluetooth wireless communication. The principle of connection is approximately the same for products specifically designed for the iPhone, as well as for equipment popular among smartphone users of other manufacturers.
Recommendations:
How to charge wireless headphones
, How to connect headphones to your TV
, How to use wireless Bluetooth headphones
How to connect
1. Turn on the wireless headphones. The supplied instructions should tell you how to turn the device on and start hardware detection mode to establish a wireless connection. Usually headsets have an indicator that lights up in different colors, depending on the mode that is currently in.
2. On the phone, enter mode to change the operating parameters. That is, the user needs to find the "Settings" button on the screen, go to the menu, find "Wireless Networks" in it and turn on Bluetooth.
3. After a short wait, the smartphone will find the equipment to be connected and, depending on its settings, will offer or not offer to enter the access password. If the user has not changed the default settings, the wireless headphones will connect without prompting the water password. How to change or find out the default password, the user will find out from the manual, which is included in the headset.
4. Going to the Bluetooth settings, you can see all devices connected wirelessly of this type. The user should see in the list the connected wireless headphones. If they are not there, then the connection with the device has not been established, so you should check the sequence of the settings and compare it with the sequence specified in this manual.
5. After a successful connection, the user will see a special icon in the status bar of the smartphone, signaling that the wireless headphones are connected.
Owners of cell phones running the Android operating system sometimes encounter problems connecting two devices wirelessly due to incorrect settings. Problems can arise not only with the pairing of two devices, but also with music playback.
Setting process
1. turn on the headset;
2. in the phone activate the data transfer mode via Bluetooth;
3. enter the wireless settings and start searching for new devices;
4. connect the found device by clicking on its name in the list of found equipment;
5. enter the code, if necessary;
6. If it is important that the sound goes to the connected headphones instead of the built-in speakers, you need to enter the settings of the phone sound system and cancel the "Sound during call" function;
7. Activating the "Multimedia Sound" feature will allow the user to listen to music through the wireless headphones.
Not all wireless headphone models support streaming media. Such restrictions are imposed at the software level, so if desired, the user can easily bypass them by installing the appropriate software.
7 best wireless headphones for phone, tablet or smartphone
Instructions for setting up Bluetooth audio transmission
1. Set up a wireless connection between the phone and the headphones.
2. Download and install the program.
3. Launch the application and switch the audio stream to the headphones.
The disadvantage of using the software is high power consumption. The battery will drain quickly, since wireless data transmission will be active all the time. You will have to turn off the application manually at regular intervals to save battery power.
Problem Solution
Usually after a software update, there are various malfunctions of connected devices. If after updating the operating system, the wireless headphones do not appear in the list of available devices for connection, try to follow the instructions below.
Software troubleshooting instructions:
1. Reboot the operating system using the appropriate button on the screen.
2. If that does not help, perform a system reset to return the system to its factory settings. Before performing a reset, you should save any user-relevant data. At the time of resetting all user data will be irretrievably erased.
The last global way to solve all problems is to reflash the device. This method will get rid of all software glitches, but if done incorrectly can do more harm than good. Therefore, if all the above measures did not help to configure the wireless connection, then contact the service center.
Topicals:
10 best Chinese wireless headphones
, 11 best wireless Bluetooth headphones
, 11 best headphones for your phone
, 5 best ASUS headphones
, 5 best Awei headphones
, 5 best Beats headphones
, 5 best Creative headphones
, 9 best Sennheiser headphones
, No sound in headphones
