Smartphone manufacturer iPhone cares about its users, so has provided in the device a feature that will not allow damage to your hearing when you connect headphones while listening to a song through the speakers at maximum volume. The control system detects changes in equipment configuration and automatically lowers the volume to an acceptable level.
When the headphones are disconnected, the settings are restored and the user can listen to music through the speakers at maximum volume again. But, for various reasons, the system fails, causing Headphone mode to remain on when the headphone is removed from the jack. How to fix the problem and regain the ability to hear sounds from the phone through the speakers at a comfortable volume level, the user will learn from this article.
Causes of the problem
To solve the problem, you need to find the cause of the malfunction. The average user is interested only in those problems with which he can cope on his own without the involvement of specialists, so look for it through a thorough inspection and analysis of a short period of operation before the occurrence of the problem.
Recommendations:
10 best headphones for Iphone
, 5 best wireless headphones for iPhone
, 5 best headphones for iPad
System Failure
Restoring the functionality of the device after a system failure is often helped by a reboot. We use both options: turn on and turn on the iPhone in the standard way, or perform a forced reboot.
Sequence of actions:
1. Disconnect the headphones, press the power button.
2. Turn on the smartphone and check if there is a problem.
3. If the problem cannot be solved, connect the charger to the phone, press and hold the Home and Power buttons until the device begins to reboot.
Objects in headset jack
Infrequent use of the headset and careless handling quickly lead to clogging of the headphone jack. As a result, the contacts in the jack can short out, telling your smartphone to connect the headset and need to turn on Headphone Mode.
Sequence of solutions to the problem:
1. Inspect the jack for foreign objects. For a closer inspection, use a bright light source. A modern flashlight or the LED light of another smartphone will do.
2. Using a toothpick, a needle, try to remove all impurities from the socket. You can try blowing out the socket with a vacuum cleaner.
Clean it carefully so as not to damage the contacts. After the procedure is done, restart your iPhone.
Water entering the device
As a result of falling in the snow, water, use in the rain, the smartphone accumulates moisture, oxidation of the contacts occurs, malfunctions occur. If the user recalls that the iPhone had direct contact with water, the device should be thoroughly dried.
Solution to the problem:
1. Using a vacuum cleaner, remove relatively large drops of water from the case and connectors.
2. Take a hair dryer or a heat fan and dry the device under a stream of warm air.
Wireless headphones for iPhones: features and cost
Problems with headphones, contacts
To get rid of the feeling that the failure is due to a mechanical failure, remove and insert the plug into the connector several times. Do this with a delay to allow the operating system to detect when the new hardware is connected and disconnected. If the device is unresponsive and continues to assume that the headphones are permanently connected to the smartphone, try restoring or updating iOS.
Restore the software
The most radical method of solving the problem is to restore the operating system. If after that the malfunction will not be eliminated, then the iPhone should be taken to repair. Usually smartphone users install various programs that change the settings of the operating system, but do not ensure the reliable functioning of all systems associated with the changed parameter. As a result, failures occur, which lead to various problems.
Make sure that you have a new version of iTunes installed on your computer before proceeding with recovery. Update the program if necessary.
iPhone recovery sequence:
1. Connect your smartphone to your computer.
2. Run iTunes and make sure that the software recognizes the connected device.
3. If everything went well, iTunes will show a message prompting the user to restore or update the software.
4. If the software does not recognize the iPhone, then perform a forced reboot by pressing and holding Home and Power until the manufacturer's logo appears on the screen and the device goes into recovery mode.
5. If the device runs iOS 6 or newer, go to settings and then to iCloud. Deactivate the "Find iPhone" feature.
6. The manufacturer recommends repeating the recovery transition procedure if the device is inactive for 15 minutes after the start of the transition.
7. Make a backup copy of all important information, as all user data will be deleted from the device after recovery.
8. Press the "Refresh" button.
9. The new data will be downloaded and installed.
After the restore, you will need to go through the initial setup and activation of the device. Cancel the restore from backup, configure the software again. You will need a SIM card inserted in the device and activated to activate the smartphone.
Topicals:
The 4 best headphones for swimming
, The 4 best Apple headphones
, 5 best Bluedio headphones
, 5 best headphones for kids
, 5 best stereo headphones
, 7 best earbud headphones
, If water gets on your headphones or inside your cell phone jack
, How to improve the sound quality in headphones
, Causes of hissing and wheezing in headphones
