In-ear headphones (vacuum, barrels) allow you to close the ear canal from external noise and provide a fuller sound, which is especially felt in the low frequencies called bass. Despite its diminutive size, the headset provides high quality reproduced sound for a single user, even with ambient background noise.
But not knowing how to properly wear an in-ear earbud may not justify the expense of an expensive purchase or bring damage to your hearing, so it's important to understand how to install vacuum barrels in your ears, what shape and size they should be, and what will ensure their retention.
Content:
Signs of not properly inserted earphones
Earbuds in the quality assembly cost from 1000 rubles, but the user can not feel the difference from an expensive headset, compared with the usual in-ear "droplets", due to the inability to properly wear headphones. This can be determined by the following signs:
- the device constantly falls out of the ears at the slightest turn of the head;
- Bass sounds bad;
- general low volume of the tune, despite the maximum sound on the phone or tablet;
- Feeling of blocked ears (as if water has got inside);
- Pain in the ear canal after a short period of use.
If one or more of the above symptoms are observed, it is an indication that the headset is worn incorrectly, but the situation can be corrected by properly selecting headphones and learning to insert them into the ear canal.
Selecting the diameter of the ear cushions and the shape of the in-ear headphones for a comfortable fit
In-ear headphones are specially designed to seal the ear canal with soft ear cushions that gently press against your skin with their smooth surface and flatten the ear canal to hold the speaker housing in place.
The latter is placed in the back of the barrel and conveys sound through a short tube. To properly wear in-ear earpieces, it is important to correctly select the diameter of the earpads and their material, which should correspond to the anatomical features of a particular person.
Recommendations:
7 best in-ear headphones
, 7 best headphones for sports
, 9 best vacuum headphones
There are three types of earbuds by number:
1 - has an edge with a diameter of 5 mm and a thickening to 7 mm, designed for children, girls or short people (although there are individual features of the ear canal that do not fall under this statistic).
2 - have a 5mm outside and an extension of up to 9 mm, which is suitable for people of average height and height.
3 - are provided with a 5mm inlet and an extension up to 11mm, which is rarely used if the ear canal diameter is large.
Selecting a headset with ear cushions of the appropriate diameter that matches the parameters of the user will ensure proper wearing and a minimum of discomfort. When choosing ear cushions, you should also pay attention to the material they are made of.
The softer it is, the more pleasant it will be for the skin and the easier it will be to insert and remove the device. The most optimal are silicone headphones. After them, in second place, are rubber earmuffs, and only then PVC.
It is important to remember that the thickness of the ear cushions also affects the wearing of in-ear headphones. The thinner the material, the easier it is to insert the barrel into the ear, but it will have less of an insulating effect and vice versa.
If all the tried options do not bring a satisfactory result, you can try to order the manufacture of in-ear headphones according to individual parameters, but it is only available in large cities and will cost more.
The shape of the headphones can be straight and curved. The first one makes your ears tired faster and they look less organic from the outside, because of the oblique entry into the ear canal. Optimal for the correct wearing are bent earmuffs where the body with the speaker has a slight twist on the tube with the ear cushions attached.
Proper installation of vacuum earphones in the ear canal
To properly install intracanal in-ear headphones, you need to follow the steps in the following sequence:
1. With one hand, take the barrel by the edge of the body and guide it into the ear canal.
2. To insert the vacuum headset you need to rotate the headset along the axis.
3. With your other hand, pull back the earlobe slightly, which will align the ear tube for a looser fit.
4. You should place the earphone at a depth of 8-9 mm from the edge and let go of the lobe.
5. The device will sit snugly in the canal, providing quality sound and minimal discomfort.
With deeper placement (10-12 mm), after 20 minutes of listening to music, your ears will begin to hurt and you will want to remove the headset. If you place the barrels at 5-6 mm from the edge of the canal, they will easily fall out when you turn your head or tilt.
How to properly warm the headphones and whether to do so
Correct placement of the wire of in-ear headphones
When earbuds are placed on an ear clip or an arch placed around the neck, the device is additionally fixed on the head and does not fly off when a person moves. But if these additional elements are not present, the proper wearing of in-ear headphones will help the proper distribution of the wire on the clothing.
The cause of falling out of the barrels is often a very stretched thin cable from a phone or mp3 player. In the case of wired headphones its length is 120-125 cm, which should be considered when deciding where to put the phone.
Optimal is to carry it in a chest inside or outside pockets. This gives a large reserve of wire for head rotation and squatting and standing up without straining the cable.
In-canal earmolds are capable of giving a pleasant experience to audiophiles because of their ability to deliver bass at sufficient volume and create a surround sound effect. But all this can be realized only if you know how to properly wear such a headset.
Topical materials:
10 best headphones for Iphone
, 11 best wireless Bluetooth headphones
, The 5 best hybrid headphones
, 5 best headphones under 1000 rubles
, 6 best Philips headphones
, 6 best headphones with good bass
, 8 best armature headphones
, The harm of headphones: the effect on human hearing
, Technical characteristics of good headphones
Earbud headphones (vacuum, barrel) allow you to close the ear canal from external noise and provide a fuller sound, which is especially felt in the low frequencies called bass. Despite its diminutive size, the headset provides high quality reproduced sound for a single user, even with ambient background noise.
But not knowing how to properly wear in-ear earbuds can not justify the cost of an expensive purchase or damage your hearing, so it is important to understand how to install the vacuum barrels in your ears, what shape and size they should be, and what will ensure their retention.
Signs that headphones are not inserted correctly
Quality in-ear headphones cost from 1000 rubles, but the user may not feel the difference from an expensive headset, compared to the usual in-ear "droplets", due to the inability to properly wear headphones. This can be determined by the following signs:
the device constantly falls out of the ears at the slightest turn of the head;
Bass sounds bad;
A general low volume of tunes, despite the maximum sound on your phone or tablet;
Feeling of blocked ears (as if water has got inside);
Pain in the ear canal after a short period of use.
If one or more of the above symptoms are present, it is an indication that the headset has been worn incorrectly, but the situation can be corrected by properly selecting the headphones and learning to insert them into the ear canal.
Choosing the diameter and shape of the in-ear headphones for comfort
These in-ear headphones are specially designed to seal the ear canal with a soft cushion that is gentle on the skin with its smooth surface and expands the passage to hold the speaker housing in place. The latter is placed in the back of the barrel and conveys sound through a short tube. To wear the earmolds correctly, it is important to choose the diameter of the ear cushions and their material, which must conform to the anatomical features of the particular person.
There are three types of earbuds by number:
1 - has an edge with a diameter of 5 mm and a thickening to 7 mm, designed for children, girls or short people (although there are individual features of the ear canal that do not fall under this statistic).
2 - have 5 mm on the outside and expansion up to 9 mm, which is suitable for people of average height and tall.
3 - have a 5 mm entrance hole and dilation up to 11 mm, which is rarely used, in case of a large diameter of the auditory canal.
Selecting a headset with ear cushions of the right diameter to suit the user's parameters will ensure proper fit and a minimum of discomfort. When choosing ear cushions, you should also pay attention to the material they are made of. The softer it is, the more pleasant it will be for the skin and the easier it will be to insert and remove the device. The most optimal are silicone headphones. After them, in second place, are rubber earmuffs, and only then PVC.
It is important to remember that the thickness of the ear cushions also affects the wearing of in-ear headphones. The thinner the material, the easier it is to insert the barrel into the ear, but it will have less of an insulating effect and vice versa. If all the tried options do not bring a satisfactory result, you can try to order the manufacture of in-ear headphones according to individual parameters, but it is only available in large cities and will cost more.
The shape of the headphones can be straight or bent. The first ones fatigue your ears quicker and look less organic in appearance because of the oblique entrance to the ear canal. Optimal for proper wearing are bent earmuffs, where the body with the speaker has a slight twist on the tube with attached ear cushions.
Proper installation of vacuum earphones in the ear canal
To properly insert the in-ear canal headphones, follow this sequence:
1. With one hand, take the barrel by the edge of the housing and guide it into the ear canal.
2. Insert the vacuum headset with a rotating motion on the axis.
3. The second hand should be used to gently pull back the earlobe to align the ear tube for a looser fit.
4. You should place the headphones at a depth of 8-9 mm from the edge and release the lobe.
5. The device will sit tightly in the canal, which will provide quality sound and minimum discomfort.
If you place them deeper (10-12 mm), after 20 minutes of listening to music, your ears will start to hurt and you will want to remove the headset. If you place the barrels 5-6 mm from the edge of the canal, they will easily fall out when you turn your head or bend over.
Correct placement of the wire of in-ear headphones
If the earmolds are placed on an ear clip or an arc placed on the neck, the device is additionally fixed on the head and does not fly off when a person moves. But if these additional elements do not, then properly wear in-ear earbuds will help the proper distribution of the wire on the clothing.
The cause of falling out barrels is often a very stretched thin cable from a phone or mp3 player. In the case of wired headphones its length is 120-125 cm, which should be considered when deciding where to put the phone. It is optimal to carry it in a breast pocket or an outside pocket. This gives plenty of headroom for head-turning and squatting and standing up without straining the cable.
In-ear earmolds are capable of giving a pleasant experience to audiophiles due to the ability to transmit bass at a sufficient volume and create a surround sound effect. But all this can be realized only if you know how to wear such a headset properly.